 |
|||
|
|||||
TW-1050 High Speed Vertical Machining Centers
TW-1050 SPECIFICATION
| MODEL | TW-1050 |
| Travel | |
| X axis (Longitudinal) | 1,000 (40") |
| Y axis (Cross) | 500 (19") |
| Z axis (Vertical) | 500 (19") |
| Spindle nose to table surface | 120-620 (5"-24") |
| Table | |
| Table dimension | 1,100 x 520 (43" x 20") |
| T-slots wide x; no. x pitch) | 18 (0.7") x 5 x 100 (3.94") |
| Table load apacity | 800kgs (1762 lbs) |
| Headstock | |
| Spindle nose (BT/CAT/ISO) | 40 Taper |
| Spindle RPM (#40 Taper) | 10,000 / 12,000 (opt.) / 15,000 (opt.) |
| Feedrate | |
| Rapid traverse for X, Y, Z axis | 36 x 36 x 32 m./.min |
| Cutting feed for X, Y, Z axis | 1-15,000 mm./.min (0.04-590 ipm) |
| Motors | |
| Main motor #40 (cont./30min) | 7.5Kw / 11 Kw |
| AC servo motor for each axis | X, Y : 3 Kw - 12 NM / Z : 4 Kw - 22 NM |
| Coolant system | 580 W |
| Lubrication system | 25 W |
| Spindle chiller system | 850 W fpr spindle over 8,000 RPM |
| Automatic tool changer | |
| Magazine for arm type | 24 / 30 tools |
| Max. tool diameter | #40 : 70 / 127 (3" /5") |
| Max. tool length | #40:300 (11.8") |
| Max. tool weight | #40: 7 kgs (15lbs) |
| Accuraccy | |
| Positioning | ±0.005 mm / ±0.0002" |
| Repeatability | ±0.005 mm / ±0.0002" |
| General information | |
| Air pressure | 5Kg / cm² over |
| Machine weight | 5,860 kgs (12,900lbs) |
| Floor space (L x W x H) | 3,800x 3,670 x 2,700 (150" x 144" x 106") |
| CNC controller | Fanuc Oi/31i, Meldas M80, Heidenhiem |
All specifications and designs are subject to change without notice.
| Standard equipment | Optional accessories | |
| Full enclosure guard | Automatic power off (M30) | 12,000 / 15,000 rpm spindle with chiller |
| Turning operation panel | Automatic lubrication system | Coolant thru spindle preparation |
| Rigid tapping | Spindle air purge system | Chip flushing system with high |
| MPG (hand wheel) | Spindle air blow system | pressure pump |
| LED work light | Coolant system with coolant tank | Chain type chip conveyor with bucket |
| Leveling bolts and blocks | Heat exchanger of electrical cabinet | 4th axis interface |
| Beacon light | Tool box for machine set up | Transformer |